Subscribe to RSS
UnitedStates Germany Russia India Turkey SouthAfrica England Netherlands Philippines Belgium Australia Brazil Spain China Kore

Dana Introduces Advanced Drivetrain Solutions and Expanded Global Support Offerings at MINExpo 2012

At MINExpo 2012 yesterday, Dana Holding Corporation (NYSE: DAN) announced the company’s enhanced support for mining OEMs and increased production of drivetrain solutions, including new manufacturing capabilities in China.

Located in booth 26193 in the South Hall of the Las Vegas Convention Center, Dana unveiled plans to launch production of driveline products at the company’s facility in Wuxi, Jiangsu Provence, China, over the next several months to better support the world’s largest market for mining machinery.

This expansion of production capabilities reflects Dana’s planned increase in global manufacturing output of axles for mining applications over the next 24 months.

Dana axle

“For more than 45 years, Dana has offered the most durable, reliable solutions to the major global suppliers of mining equipment,” said Aziz Aghili, president of Dana Off-Highway Driveline Technologies. “With the demand for mining equipment expected to more than double over the next 10 years, we have increased our production capabilities and deployed our engineering and manufacturing resources to more efficiently supply our driveline solutions to the regions of the world with the highest anticipated growth.”

Expanded Support for Mining in China

This summer, Dana began producing five models of medium- and large-sized Spicer® mining axles in China. Designed with dynamic load capacities ranging from 20 to 60 tons (18 to 54 tonnes), these axles are used for a variety of mining vehicles, including load haul dumpers (LHDs), mining trucks, and scoops.

The deployment of added manufacturing capacity is the latest in a series of initiatives to better support Dana’s OEM customers in China. In February, Dana announced the start of production on the Spicer TZL Series, a new line of powershift transmissions for premium ZL50 and ZL60 front-end loaders and 110-165 kW (150-225 horsepower) motor graders manufactured in China.

Next year, Dana plans to open a 130,000 square-foot (12,000 square-meter) technical center in Wuxi to provide advanced product and applications engineering through research, design, development, and testing of driveline, sealing, and thermal-management products, including electric vehicle battery coolers.

Global Resources Strategically Deployed for Mining OEMs

Dana’s production of mining drivelines in China is the latest example of the company’s increased support for the industry. Over the past two-and-a-half years, Dana has increased its production of axles, transmissions, and driveshafts by 50 percent at its four mining-focused manufacturing facilities in Arco, Italy; Brugge, Belgium; Lugoff, South Carolina, USA; and Wuxi, China.

Dana offers a comprehensive line of Spicer® drivetrain products designed to provide the vehicle performance, efficiency, reliability, and reduced operating costs required in mining. Dana also supplies a line of Victor Reinz® sealing products and Long® thermal-management technologies specifically engineered for engines and transmissions deployed in mining vehicles.

To better service driveline systems and individual components, Dana has enhanced its aftermarket support, now operating 17 aftermarket distribution centers globally to provide essential logistical support and a ready supply of genuine aftermarket products that reduce downtime and maintenance costs. Dana engineers work closely with OEMs to develop maintenance kits complete with the parts, instructions, and tools needed for typical service needs encountered at remote mining locations.

At MINExpo, Dana will exhibit the Spicer Model 16D axle commonly used on five- to seven-ton (4.5- to 6.5-tonne) LHDs and 28- to 33-ton (25- to 30-tonne) mining trucks. The Model 16D provides excellent torque capacity and the traction necessary for varying ground conditions.

About Dana Holding Corporation

Dana is a world-leading supplier of drivetrain, sealing, and thermal-management technologies that improve the efficiency and performance of passenger, commercial, and off-highway vehicles with both conventional and alternative-energy powertrains. The company’s global network of engineering, manufacturing, and distribution facilities provides original-equipment and aftermarket customers with local product and service support. Based in Maumee, Ohio, Dana employs approximately 25,500 people in 27 countries and reported 2011 sales of $7.6 billion. For more information, please visit www.dana.com.

Dana Off-Highway Driveline Technologies
MINExpo 2012
Technical Highlights

Spicer® Model 16D Axle

•Used on five- to seven-ton (4.5- to 6.5-tonne) LHDs and 28- to 33-ton (25- to 30-tonne) mining trucks
•Dynamic load: 21 tons (19,068 kg)
•Maximum output torque: 111,600 Nm
•Planetary ratio: 4.941
•Ratio range: From 23 up to 31
•Input speed: 4,000 RPM
•Flange to flange: From 1,472 to 2,768 mm

(Dana Holding Corporation)

 

source: MetalNews

0 commentsback to post

banner

Add your comment

Nickname:
E-mail:
Website:
Comment:

*

Other articlesgo to homepage

Opening nieuw Benelux distributiecentrum bij IMES in Hasselt

Opening nieuw Benelux distributiecentrum bij IMES in Hasselt(0)

Descours & Cabaud, een multinational van Franse origine, die onder meer eigenaar is van IMES in Hasselt en Van den Broek in Herentals, heeft in de industriezone Ekkelgaarden een nieuw distributiecentrum geopend voor de Benelux. De totale investering bedraagt 6 miljoen euro. Het nieuwe distributiecentrum werd gebouwd aanpalend aan het bestaande hoofdkantoor van IMES. Op

Super precisie lagers van Barden helpen om Mars te verkennen

Super precisie lagers van Barden helpen om Mars te verkennen(0)

BARDEN CORPORATION | DANBURY, USA Super precisie lagers helpen nieuwste onderzoek van NASA ’rover’ om de meest extreme omstandigheden op Mars te weerstaan. De lagers zijn ontworpen en ontwikkeld door ‘The Barden Corporation, super precision Schaeffler Bearings specialist’ gevestigd in Danbury, Connecticut USA. Met de grootte van een kleine auto en een gewicht van net

ZKL lanceerd Cilindrische rollager PLC_412-63

ZKL lanceerd Cilindrische rollager PLC_412-63(0)

Medewerkers van ZKL voltooie met succes de  ontwikkeling en productie van een grote dimensionale cilindrische rollager PLC_412-63 voor een belangrijke buitenlandse klant. Hierbij de technische kenmerken voor een betere voorstelling: Buitendiameter: 900 mm Hoogte: 210 mm Gewicht: 612 kg   Klik op de bron om de details te lezen. source: BearingNews

Tonlagers voor de” High Roller”

Tonlagers voor de” High Roller”(0)

De Amerikaanse Bridge Company heeft SKF gecontracteerd om technologische oplossingen te leveren voor de Las Vegas “High Roller”, die binnenkort ‘s werelds hoogste reuzenrad zal zijn. SKF levert 170-meter hoge reuzenrad Caesars Entertainment Corporation wiel met twee op maat gemaakte sferische tonlagers, samen met aanverwante technologieën. De twee sferische tonlagers wegen ongeveer 8,8 ton per

NTN Bearing Corporation Celebrates 50 Years in America

NTN Bearing Corporation Celebrates 50 Years in America(0)

Mt Prospect, IL, March 14, 2013 – NTN Bearing Corporation of America is proud to reflect back on its fifty years of success in the United States, providing world-class products to a wide variety of industries. Incorporated on this day in 1963 by Shungi Iishino and “Lucky” Itoh, the Japanese-based company opened its first corporate

read more

Contacts and information

Social networks

Most popular categories

Legal Notice

© 2012 BEARING NEWS All rights reserved.