Subscribe to RSS
UnitedStates Germany Russia India Turkey SouthAfrica England Netherlands Philippines Belgium Australia Brazil Spain China Kore

Bearing Failure Percentages

Did you know that over 60% of bearing failures are due to Poor Fiting, Poor Lubrication or Contamination? Only 34% of bearings ever see their Fatique limit and ‘wear out’.


Are you taking all the correct measures to ensure you too do not get caught with downtime due to bearing failure?

Maintenance Matters!

Below is a link to a very interesting article on the importance of maintenance on machines and plant focused around the cost associated with bearing failures.

Check out the state of the Spherical Roller Bearing Phil Williams (SKF Training Manager) is holding, also shown to the right!

please click here for the article

 

source: Waikatobearing

0 commentsback to post

banner

Add your comment

Nickname:
E-mail:
Website:
Comment:

*

Other articlesgo to homepage

Bevestig de Lager Conditie door Geluidsanalyse

Bevestig de Lager Conditie door Geluidsanalyse(0)

Uit verschillende onderzoeken is vastgesteld dat het monitoren met ultrasound zeer vroeg waarschuwt voor lagerschades. Verschillende stages van lager falen zijn vastgesteld: 8dB  boven basiswaarde geeft gebrek aan smering aan; 12dB boven basiswaarde is het begin van lagerschade; 16dB boven basiswaarde geeft een verder gevorderd stadium aan van lagerschade (zichtbare schades); terwijl  35-50dB toename boven basiswaarde zware lagerschade aangeeft. Voor degene die willen werken met spectrum

Hoe Ultrasound Lager Inspectie Werkt

Hoe Ultrasound Lager Inspectie Werkt(0)

Mechanische verplaatsing produceert een breed spectrum van geluid. Een grote bijdrage van stress in machines is wrijving. Ultrasound instrumenten detecteren wrijving. Door te focussen op een smalle band van hoge frequenties, detecteert de Ultraprobe subtiele veranderingen in amplitude en geluidkwaliteit geproduceerd door operationele apparatuur. Daarna moduleert de Ultraprobe de normaal niet te detecteren geluiden en

Identifying and correcting the causes of bearing failure

Identifying and correcting the causes of bearing failure(0)

BARDEN CORPORATION | PLYMOUTH UK Identifying and analysing the root cause of a bearing failure is critical in order to prevent similar failures from occuring again. Brian Williams, Quality Director at The Barden Corporation, urges companies to introduce a regime that enables the symptoms of bearing damage to be recognised early, as well as putting

Premature bearing failures in wind gearboxes and white etching cracks (WEC)

Premature bearing failures in wind gearboxes and white etching cracks (WEC)(0)

Kenred Stadler, SKF programme manager renewable energy application development centre, Schweinfurt, Germany (corresponding author) Arno Stubenrauch, SKF manager development cluster roller and plain bearings, Schweinfurt, Germany. Wind turbine gearboxes are subjected to a wide variety of operating conditions, some of which may push the bearings beyond their limits. Damage may be done to the bearings,

Single Turn Wave Springs

Single Turn Wave Springs(0)

Conventional Gap and Overlap Type Wave Springs are used in a wide variety of applications. For short deflections and low-medium forces, they function with precision and dependability. Bearing Preload Springs These two types of Smalley Wave Springs permit radial expansion or growth in diameter within a cavity, without the binding or hang-up normally associated with

read more

Contacts and information

Social networks

Most popular categories

Legal Notice

© 2012 BEARING NEWS All rights reserved.